Use-Case – HIPO ULTRA-B Automatic Strapping Machine with Conveyor Belt vs HIPO ULTRA Auto Strapping Machine

  • Eliminates manual carton transfer
  • Up to 50% higher line speed
  • Lower mis-strap and rework cost
  • Inline integration with conveyors
  • Under 2-year payback at volume

The Challenge

An e-commerce fulfilment centre in northern Italy was processing over 18,000 cartons per shift, handling parcels of varying sizes. Their stand-alone HIPO ULTRA Auto Strapping Machine required staff to remove cartons from the conveyor, apply the strap, and return them to the outfeed line. This process introduced extra manual steps, caused queues, and led to occasional strapping errors when operators hurried.

Management aimed to boost throughput on the shipping line by at least 50%, reduce manual intervention, and maintain consistent quality, all without increasing staffing levels. The decision was between retaining the current HIPO ULTRA Auto Strapping Machine (Product B) or upgrading to the inline HIPO ULTRA-B Automatic Strapping Machine with Conveyor Belt (Product A).


Product B: HIPO ULTRA Auto Strapping Machine

The HIPO ULTRA Auto Strapping Machine is capable of up to 72 cycles/min, featuring a standard arch size of 650 × 500 mm and a worktable height of 850 mm. In practice, at the fulfilment centre, actual output was limited by manual loading and unloading, averaging around 20,000 cartons per shift, which is approximately 60% of its theoretical maximum.

Each shift required two operators to move cartons between the conveyors and the machine, with labour costs of approximately €25 per hour per person. Over an 8-hour shift, this amounted to €400 per day in direct labour for the strapping area, not including time lost due to misplaced boxes or occasional strapping errors that needed correction.


Product A: HIPO ULTRA-B Automatic Strapping Machine with Conveyor Belt

The HIPO ULTRA-B combines a high-speed strapping head with an automatic conveyor, enabling true inline operation at speeds of up to 50 cycles/min. Even at 60% utilisation, the centre achieved a steady 30,000 cartons per shift without the need for manual carton transfer.

Compatible with PP straps from 5–9 mm, with adjustable strap tension up to 30 kg, and a standard 650 × 500 mm arch, the machine suited the existing range of cartons. With a power requirement of 1.0 kW and noise levels at or below 75 dB(A), both energy use and health and safety impact were kept low. Crucially, inline sensors and conveyor synchronisation eliminated the need for one operator at the station and reduced both strapping errors and jams.


ROI & Value Analysis

Product B Performance:

Product A Performance:

Investment Comparison:
Product B price (current HIPO ULTRA): €3,799
Product A price (HIPO ULTRA-B): €6,999
Price difference: €3,200
Daily savings with Product A (labour only): €200/day less in labour costs, with additional savings from reduced rework not included
Payback period for the price difference: less than 1 month based on labour savings alone; even allowing for partial utilisation and downtime, the centre calculated a payback period of under 2 months.

In addition to direct cost savings, the increased capacity of 10,000 cartons/day enabled the site to manage seasonal peaks without overtime or temporary staff, further enhancing return on investment.


Verdict

Opt for Product B if your available budget is firmly below €4,000 and your daily carton throughput does not exceed 10,000 units per shift, with staff already assigned to manual processing tasks.

Product A is the preferred choice for those operating ongoing e-commerce or logistics workflows, requiring throughput above 15,000–20,000 cartons per day, and seeking to eliminate manual intervention between conveyor systems. The HIPO ULTRA-B’s built-in conveyor, reliable 50 cycles per minute, and single-operator configuration make it the most advantageous investment for the majority of fulfilment centres in the long term.

“Transitioning from our stand-alone strapping station to the HIPO ULTRA-B inline system enabled us to reduce our workforce by one operator per shift and boosted our outbound processing capacity by over 40% during the busiest periods. Incidents of mis-strapping have become rare, and our dispatch line now matches the speed of our picking operations.” — Luca Bianchi, Operations Manager, FastPack Logistics / Bologna, Italy