Selecting the correct electric pallet truck battery

The XT2 battery is a 48 V pallet truck battery for the SMITH XT2. The CLE battery is a 12 V, 120 Ah traction battery for the SMITH CLE walkie stacker with S-Ride platform, while the CLJB battery is a 12 V, 100 Ah battery for the SMITH CLJB walkie stacker.

Every battery in this range is tailored to the machine listed in its title, ensuring the size and connector are a perfect match for the battery compartment and plug. Using a battery that does not match can result in poor connections or may not fit the compartment at all.

When selecting a battery, always begin with your machine model and choose the battery made for it. This ensures you get the working time intended by the manufacturer. The voltage and capacity for each battery are shown in its title and in the table below, so you can compare them with the details on your current battery.

Matching a pallet jack battery to your equipment

To replace a pallet jack battery, select one with the same voltage as your machine. The ampere-hour (Ah) capacity determines how long your equipment can operate between charges.

If you use a battery with the wrong voltage, the machine may not start or the controller could be damaged. For example, a 12 V battery will not power a machine built for 48 V, and a battery with too high a voltage can cause costly faults. If you choose a battery with a lower ampere-hour rating than your previous one, the machine will run out of power sooner during use.

When installing a new battery, always switch the machine off and remove the key before disconnecting the old battery. Ensure the new battery’s connector is fully seated: a loose connection can overheat and damage the contacts. Record the installation date on the battery so you know its age when performance begins to decline.

Overview of batteries and charger for SMITH equipment

The table below lists the three batteries and the charger available in this category, along with their main specifications and the machine each one is designed for. Each part name links to its product page.

To use the table, first find your machine in the second column. Then, read across to the third column for the battery or charger details specific to that model. For instance, the SMITH XT2 uses a 48 V battery and a 2 A charger with an EU plug.

Safe charging of your pallet stacker battery

The XT2 charger is a 2 A model with an EU plug, designed for use with the XT2 battery. If your sockets are of a different type, a plug adapter will be required.

The pallet truck charger in this category is for the XT2. Always charge each battery only with its designated charger. Chargers for other batteries may have different voltages or charging methods, even if the plug fits.

Charge the battery after each shift, in a dry and well-ventilated area away from heat sources, and allow the charging cycle to finish before unplugging. Whether short top-up charges are suitable during breaks depends on the battery type, so follow the charging instructions for your machine.

Before connecting, check the charger’s cable and plug for any visible damage; a damaged cable could cause a short circuit or prevent the charger from working. Keep the charger clean and uncovered during use to avoid overheating. Do not leave the machine with a flat battery over weekends or holidays; charge it before leaving.

Spare parts for SMITH walkie stackers

These pallet truck batteries and the charger are spare parts for the three SMITH machines listed above; the machines themselves can be found in the walkie stackers category.

If you require other spare parts for these machines, use the Get offer button on the product card and provide your machine model and the part needed. Have your machine’s model and serial number ready when ordering to ensure you receive the correct part. Both numbers are shown on the machine’s rating plate.

Extending the life of your pallet truck battery

A pallet truck battery will last longer if it is charged after every shift and not left empty.

Signs that a pallet truck battery is wearing out include reduced operating time per charge or the machine slowing down earlier in the shift. If you notice these, plan for a replacement; the correct battery for each machine is listed above.

Stop and recharge when the machine starts to slow down rather than running the battery completely flat. Allowing the battery to discharge fully shortens its lifespan.

Keep the battery and its terminals clean and dry to avoid connection issues. Inspect cables for any signs of wear or damage, as faulty cables can interrupt power. Dust and spills can accumulate on the battery during use, so regular cleaning helps maintain good contacts and safe operation.

Cold conditions can reduce the battery’s run time on a single charge. Where possible, charge and store the machine at room temperature. Before storing a machine for an extended period, charge the battery and recharge it at intervals while in storage to prevent deep discharge.

Switch off a machine that will not be used for several days with the key, as its electronics may otherwise slowly drain the battery. Do not put a battery on charge while it is still warm from recent use; allow it to cool down first. Keep a record of how long the machine operates on a full charge: if the running time drops noticeably, the battery is nearing the end of its service life.

Points to confirm before purchasing

Before buying a pallet truck battery, check the model of your machine, the voltage and capacity of your existing battery, and whether you also require a charger.

You will find the machine model on its rating plate, and the voltage and capacity on the label of the current battery.

Check your charger before buying a replacement battery, as a faulty charger will not charge a new battery any better than the old one. For the XT2, order the 2 A charger with the battery if your previous charger is missing or not working. If you are unsure which battery is suitable, send us the machine model and serial number using the Get offer button before placing your order.

Pallet truck spare parts prices

The latest price for each pallet truck battery and charger is displayed on its product card above.

Over the lifetime of your machine, the battery is one of the main ongoing costs, so careful charging and regular maintenance are worthwhile.

Replace a worn-out battery before it fails during a shift, as a sudden breakdown can halt production or cause delays. If you require several items, you can add them all to one request using the Add to inquiry button. This is helpful for maintenance teams planning to service multiple machines at once and wishing to order all necessary pallet truck spare parts together. Return the old battery for recycling; it must not be disposed of with general waste.

Frequently asked questions about pallet truck batteries

Which battery is suitable for my SMITH machine?

Each pallet truck battery is designed for a specific SMITH model. The XT2 battery is for the XT2, the CLE battery fits the CLE stacker with the S-Ride platform, and the CLJB battery is for the CLJB stacker.

Can I use a different charger for my pallet truck battery?

Only use the charger intended for your battery. The charger available in this category is the 2 A charger with an EU plug for the XT2.

How can I tell when my pallet truck battery needs replacing?

If your machine runs for a much shorter period on a single charge, or operates more slowly towards the end of a shift, the battery is worn out. The correct replacement for each SMITH model is listed above.