Use-Case – FLEX BOX Semi automatic Case Erector

  • Halved box forming time
  • Saved almost one FTE
  • Removed packing-line bottleneck
  • Reduced repetitive strain complaints
  • Payback in nearly one month

The Challenge

An e-commerce fulfilment centre located near Graz, Austria, processes approximately 480 cartons each day, with the majority being medium-sized packages. Previously, all cartons were assembled manually at the beginning of the packing line. A single operator would spend most of their shift opening flat boxes, folding the bases, and holding them steady while packers attempted to load the contents.

This manual approach restricted throughput to about 2 cartons per minute and consistently caused a bottleneck. Operators experienced wrist and shoulder strain from the repetitive folding, and supervisors often had to assign a second person to assist during busy periods, which increased the labour cost per consignment.


Manual Process

Under the manual system, one dedicated staff member was responsible for case erection, with packers stepping in to help during peak times. The process was inconsistent in speed and offered poor ergonomics.

Before Automation:

The forming station often caused delays for the entire line whenever the main operator was interrupted or took breaks. In addition to lost productivity, management noted several repetitive strain complaints each quarter directly linked to manual folding and holding of cartons.


Automated Solution

The warehouse introduced the FLEX BOX Semi automatic Case Erector at the start of the packing line, integrating it with their existing carton sealing equipment. Now, a single operator loads blanks into the magazine and feeds them into the machine; the erector pneumatically folds the bottom flaps and keeps the box upright for straightforward filling.

After Installing FLEX BOX Semi automatic Case Erector:

The FLEX BOX removed the need for packers to assist with case forming. The dedicated operator now spends less than half a shift on box erection and is able to help with other duties, while ergonomics have improved due to the adjustable worktable and less manual folding.


ROI Calculation

Investment:
Machine cost: €2,199
Daily time required before: ≈6.4 hours/day
Daily time required after: ≈3.3 hours/day
Hours saved per day: 6.4 − 3.3 = 3.1 hours/day
Daily savings: 3.1 hours × €25/hour ≈ €77.50/day (rounded to €78/day)
Extra savings from less rework and overtime: ≈€22/day
Total daily savings: ≈€100/day
Monthly savings (22 working days): €100/day × 22 days = €2,200/month
Payback period: €2,199 ÷ €100/day ≈ 22 days (≈1.1 months)


Conclusion

With the introduction of the FLEX BOX Semi-automatic Case Erector, a persistent bottleneck was eliminated at the e-commerce warehouse, resulting in almost a fifty percent reduction in manual box assembly and a significant decrease in the need for reworking. The investment was recouped in just over a month, whilst also enhancing operator comfort and releasing additional capacity for future expansion.

“Thanks to the FLEX BOX, we now assemble the same 480 cartons in approximately half the time, and our labour costs for box forming have fallen from €160 to about €80 per day. Achieving a return on investment in roughly 22 days, whilst also reducing the physical burden on our staff, made this one of our most rapid and effective enhancements.” — Markus Huber, Operations Manager, E-Com Fulfilment GmbH / Graz, Austria