Use Case – AUTOBOX10 Automatic Case Erector

  • Reduced case erecting labor 60%
  • Freed one full-time operator
  • Cut carton defects by 70%
  • Stabilized output at 1,200/day
  • Payback in under 4 months

Metric Previously (Manual / Semi-automatic) Subsequently
Daily Time 8.0h/day 3.0h/day
Labor Cost €200/day €50/day
Payback Manual only 3.3 months

The Challenge

A food and drink manufacturer located near Graz was manually assembling and sealing cartons in its dispatch area. The site processes approximately 1,200 cartons each day, with two staff members assigned to carton assembly during the busiest shifts.

Each carton was opened, folded, and sealed by hand using manual tape dispensers. This resulted in lengthy queues at the packing stations, inconsistent squareness of boxes, and frequent corrections when cartons failed to fit the automated conveyors. Overtime for the packing team averaged five hundred euros per month, mainly due to the slow manual assembly process.


Manual Process

Staff followed a repetitive routine: select a flat carton, open it, fold the flaps, and then apply tape by hand. Operator fatigue and differences in technique led to uneven taping and sometimes damaged corners.

Prior to Automation:

With 6% of cartons needing to be refolded or resealed, packers frequently halted the line to correct boxes that were not sufficiently square for automatic weighing and labelling. Management aimed to recover at least one full-time position from this area and ensure a steady outbound flow.


Automated Solution

The company installed the AUTOBOX10 Automatic Case Erector at the start of the packing line, supplying assembled, bottom-sealed cartons straight onto the conveyor. The equipment was configured for the business’s three primary carton sizes and linked to the existing tape stock.

Following Installation of the AUTOBOX10 Automatic Case Erector:

Now, a single operator oversees the AUTOBOX10 for roughly 2 hours daily to load cartons, change tape rolls, and perform checks, then attends to other duties. The line reliably achieves the target of 1,200 cartons per day with spare capacity for peak periods.


ROI Calculation

Investment:
Machine cost: €9,990
Daily savings: Before €200 per day − After €50 per day = €150 per day
Monthly savings (22 working days): €150 per day × 22 days = €3,300 per month
Payback period: €9,990 ÷ €3,300 per month = 3.03 months ≈ 3.1 months

Further, there are additional benefits such as fewer stoppages due to misaligned cartons and reduced overtime during busy weeks. The AUTOBOX10 also allows for increased throughput without the need for extra staff in the dispatch area.


Conclusion

By switching from manual case assembly to the AUTOBOX10 Automatic Case Erector, the facility reduced assembly labour from 8.0 hours to 2.0 hours per day and cut rework by two-thirds. The project generated direct labour savings of approximately €150 per day, resulting in a payback period of just over three months.

“The AUTOBOX10 released almost a full operator from carton assembly, lowered our daily labour from €200 to around €50, and we now process 1,200 cartons a day without the previous bottlenecks. Recovering our investment in just over three months made this one of the simplest investments to approve.” — Martin Hofer, Packaging Manager, AlpenFrisch Foods/Graz, Austria